DIY Light Bulb Vase

193552

 

DIY Light Bulb Vase…

Adorable and a fantastic use for old light bulbs!  Gotta love great recycling/upcycling ideas.

What you need: A light bulb (any shape or size will work!), pliers and gardening wire.

Step One: First you need to remove the little silver layer on the bottom of the light bulb.  Work the pliers under the layer to create a little lip, and then you should be able to peel it right off with the pliers.

Step Two: Now you have to remove the black cap from the bottom of the light bulb. This was the most difficult part for me – you DEFINITELY want to wear safety goggles and be extremely careful, as it is glass.  Some sites suggest using a hammer to crack the black glass but this didn’t work for me – with some time, I was able to work the pliers into the hole left after you remove the silver cap, and snap the glass.  I used the pliers to tap the rest of the black glass off the bulb.  Do this outdoors or over a hard surface so you can sweep up the bits of glass.

Step Three: Once the black glass was removed it was really easy to get the little glass tube and wiring on the inside of the bulb out – I simply tapped it with the pliers and it broke right off.

And now you have your empty light bulb! I didn’t like how the metal part looked so I covered it with a little piece of fabric:

Step Four: Add flowers and water, and hang with the gardening wire!

Source: http://blog.freepeople.com

Comments

comments

Leave a Reply

Your email address will not be published. Required fields are marked *